Telegärtner UK services a wide variety of market sectors with customized assemblies, such as telecommunications, marine, defence, aviation, rail and industrial. With over 35 years of experience in a multitude of markets, our expertise can be utilized to offer custom-made assemblies according to individual customer requirements. With production sites in the UK and Slovakia, we can offer a rapid prototype and pre-production service, highly skilled production staff following IPC620 workmanship standards combined with continuous improvement in technological capability.



  • Custom-made assemblies according to individual customer requirements.
  • Extensive range of capabilities to include Coax, multiwire, overmoulding, panel assemblies and wiring looms
  • Rapid prototype and pre-production service
  • All assemblies tested, capabilities ranging from high frequency RF, PIM and multipoint automatic testing for continuity and high potential
  • Labelling for identification and traceability, barcoding, QR and serialised batches
  • IPC620 workmanship standard accredited by on-site authorised trainer
  • ISO 9001 & AS9120 certified (Telegärtner UK)
  • ISO 9001, ISO 14001, ISO 45001 and AS9100 certified (Telegärtner Slovakia).


Telegärtner UK can develop any new cable assembly project by using dedicated Applications, Design and Production Engineers to assist with and enhance the customer’s vision with true product realization. As a part of the total solution we offer rapid prototype and pre-production service to provide customers full support from the start of the project, all the way through to project conclusion.



Find the perfect assembly for every application:

Flexible Coaxial Cable Assemblies

Telegärtner has been producing cable assemblies for almost 40 years. With this long experience and state-of-the-art crimping, soldering and termination techniques, Telegärtner UK has become a renowned European expert in coaxial cable assembly. The product range includes a wide selection of assemblies from flexible standard coaxial assemblies to copper corrugated antenna cable assemblies. From design to NPI, prototype and series production - everything from a single source either standard or bespoke designs.


    • Flexible standard and miniature cable assemblies
    • Copper corrugated antenna cable assemblies
    • Jumper cable assemblies
    • Low loss RF cable assemblies
    • All standard RG/U cable types
    • Coaxial attenuators and feedthroughs

      With our coax configurators you can configure your individual RF cables incl. cable protection, labelling and cable length quickly and easily at any time.


      Semi-Rigid Cable Assemblies

      One of the key capabilities for Telegärtner UK is the production of semi-rigid cable assemblies, manufactured according to customer requirements. The developed length of the cable is accurately calculated using the latest AutoCAD Inventor 3D software to draw the cable design. Once drawn our experienced production engineers can utilise our software controlled automated semi-rigid bending machine and environmental chamber to offer a high-quality, precise and competitively priced solution every time.



      • Conformable and semi-rigid cable assemblies
      • Delay lines and Phase matched sets
      • SMA and N type connectors and many more
      • Typical cable types; UT-141, Flexiform 402, RG402/U, UT-85, Flexiform 405 and RG405/U

      Multicore and Data Cable Assemblies

      Telegärtner UK offers a wide selection of multiwire, data cable assemblies and wiring looms. The broad selection ranges from simpler ribbon cable assemblies to more complex wiring harnesses and assembly kits. Telegärtner UK has successfully produced complicated looms for a variety of customers in Broadcast and Industrial markets plus many wiring harness cable assemblies for the Telecoms, Marine, Rail and Defence industry sectors, each produced to the highest standard.

      Product types:

      • Screened and unscreened cable assemblies
      • Twisted pair and multicore cable assemblies
      • Mixed signal and power cable assemblies
      • Power leads and coiled cords
      • Computer and data assemblies
      • MIL-spec assemblies
      • Ribbon cable assemblies
      • Wiring harnesses and looms
      • Industry standard cables (2MBIT / Alarm / PV / DMX / RET cable assemblies)

      Overmoulded Assemblies

      Telegärtner is an expert in the implementation of overmoulded assemblies. We have the capacity to develop projects from beginning to end and supply a wide, diverse range of customers throughout a number of industry sectors, such as Medical and Telecoms. In-house multi-purpose tooling design ensures that a full range of cables and connectors is covered and can be seamlessly changed to provide high volume quick turnaround capability. High-pressure thermoplastic elastomers and low-pressure hot melts are used for the production of overmoulded assemblies. Telegärtner is able to overmould small and medium-sized connectors, ensuring a reliable and efficient solution for your needs. 


      • High pressure thermoplastic elastomer
      • Low pressure hot melt
      • Small or medium sized designs
      • Design and supply of multi-cavity tooling produced with AutoCAD Inventor

      Panel Assemblies

      To complement our cable assembly capabilities, Telegärtner UK also offers panel assembly services. Our panel assemblies are accurately designed using AutoCAD Inventor software in order to optimize the space and cable routes to give the best solution. We offer customised designs using screen printing and PCB design skills to solve your design problems. The result is the ability to offer bespoke panel assemblies providing a complete solution, manufactured and printed to customer specifications.



      • Interface and control panels
      • 19” rack mounted panels
      • Splice panels

      Enclosure and Box Build

      Telegärtner UK also offers enclosure and box build cable assembly solutions to ensure all product requirements can be fulfilled from one source. Telegärtner UK can provide turnkey solutions from R&D to procurement all the way to assembly. We can offer solutions made to customer specifications and supply finished metalwork painted, printed and populated with connectors, cables, switches, wiring or PCBs to suit any application. Design efficiency is increased by integrating systems and re-engineering in order to supply the ideal solution to our customers. With extensive experience, Telegärtner UK is in a good position to supply to various market sectors, such as Marine, Automotive, Defence and Aerospace.



      • Turnkey solutions provided (R&D, procurement and assembly)
      • Metalwork supplied and finished to customer requirements
      • Populated with controls, switches, wiring harness and PCBs (as specified)
      • Integrating systems and re-engineering to increase design efficiency

      You can also find all the information you need in our brochure

      Questions? Contact us!

      Personal Data:

      Contact Data:

      Your message:

      Consent to data processing I hereby consent to the processing of my personal data as described in the Privacy Policy. 
      You hereby consent to the processing and use of your data transmitted to us (name, address and e-mail address) for advertising and marketing purposes: We may transmit information on the following topics: Products and services, for example via the following channels e-mail, telephone, mail.