4.3-10 Design Variants
RF Connectors for Mobile Radio Communications
All of the 4.3-10 connectors meet the requirements of IP68 and, because of the excellent properties of materials used, are suitable for temperatures ranging from -40° C up to +85° C. Customised connector designs for use at higher temperatures are also possible on demand .
4.3-10 RF connectors are for use in outdoor telecommunication installations, in mobile radio, communication engineering and radar applications.
The main feature of the push-pull design is the quick and reliable coupling mechanism. Because no tools are required to mate the connectors, any problems with packing density are immediately resolved.
The screw designs are more rugged because of the threaded mating and, despite the use of high-quality materials, are less expensive because of the simpler and cost-effective design.
The advantages of the new 4.3-10 series are obvious. When compared directly with 7-16 connectors, the compact design allows a space saving of approx. 25 %, at the same time reducing the weight by more than half. Perfect pre-requisites for the increasing efficiency demands being made on mobile radio networks.
Despite their compact design, the connectors have excellent performance characteristics. And the electrical performance is independent of the torque. Transmission power is 500 W at 2 GHz. Outdoor applications are not a problem thanks to the impervious design of the mating faces.
|Screen effectiveness||≥ 110 dB @ DC to 6 GHz (Screw Type)
≥ 90 dB @ DC to 6 GHz (Push-Pull / Handscrew Type)
|Passive Intermodulation||– 166 dBc @ 2 x 43 dBm|
|Voltage proof||2,5 kV @ 50 Hz|
|Frequency range||up to 6 GHz|
|Working temperature||-40°C to +85°C|
|Power handling||700 W (1 GHz); 500 W (2 GHz)|
|Recommended torque (Screw Type)||5 Nm|